Call Today

 

 

Everyone has their private rationale when it comes to Hot Water Heater Repair.

Lots of modern-day homes use an electric water heater for their heater, due to its benefit as well as convenience of use. However, just like any other electrical home appliances, troubles might arise with its usage, suddenly. It can be actually irritating to awaken to a cold shower instead of a hot one or having your bathroom with water that isn't warm adequate or even too hot. Whatever the case may be, hot water heater issues can be fairly aggravating. Fortunately, we've made a listing of feasible solutions to your water heater issues. There are a number of elements that might trigger much of these troubles, maybe a concern with the power supply, the electric burner, or the thermostat. Prior to doing anything, guarantee you switch off the major power supply for safety. Whatever the problem is, getting it fixed need to not pose too much of a concern if you adhere to these steps:

 

Examine Your Power Supply:

As fundamental as this may seem, it is really needed. Without sufficient power, your water heater will certainly not work. So the first thing to do when your water suddenly retires is to verify that it isn't a power problem. Examine if the fuse is blown out or the circuit breaker stumbled. If the circuit breaker is the concern, just turn it on and off once again. Replace any kind of damaged or damaged fuse. Check the appliance with power after these modifications to see if it's now working.

 

Examine the Burner in the Hot Water Heater:

If it's not a power issue, then attempt looking into your burner if it is still working. Evaluate each of your heating elements to ensure the problem isn't with any one of them. If any one of them is defective, replace that component and afterwards check whether the hot water is back on.

 

Examine Your Thermostat:

If your hot water heater still isn't working or the water coming out isn't warm enough, you might require to check the temperature level settings on your top thermostat. Make sure the circuit breaker is turned off before doing anything. Open up the gain access to panel and press the red switch for temperature reset over the thermostat. This ought to aid heat up the water. Transform the circuit breaker back on and inspect if the problem has actually been dealt with.

 

Call A Specialist:

If after replacing all damaged parts and also resetting your temperature, the hot water heater still isn't working, you might need to speak to a professional plumber for a specialist point of view. The problem with your heating system could be that the hot and cold faucets have been changed or it might be undersized for the amount of warm water needed in your house. Whatever the situation may be, an expert plumber would aid resolve the trouble.

 

Final thought

Hot water heater problems are not constantly major. Much of them are due to small issues like a blown fuse or damaged heating element. Replacing the faulty parts need to work. Nonetheless, if you are still not able to address the problem, give a call to your local plumber to come to get it taken care of.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

I stumbled upon that write up about Hot Water Heater Repair while browsing on the internet. Remember to take the opportunity to promote this blog post if you enjoyed reading it. I love reading our article about No Hot Water — Water Heater Repair.

Appointment